S3090旋转废料 & 拆迁剪切
维
- 重量-臂架
- 19889lb
- 重量-棒式安装
- 19316lb
- 长度
- 211in
- 高度
- 71in
- 宽度
- 51in
- 下巴宽度-固定
- 24in
- 下巴宽度-移动
- 7in
- 开口处
- 35.8in
- 下巴深度
- 35in
- 喉咙力
- 1320年ton-f
- 顶力
- 534年ton-f
- 提示力
- 282年ton-f
- 切断电路-最大释放压力
- 5075 psi
- 切断电路-最大流量
- 185加仑/分钟
- 旋转回路-最大释放压力
- 2030 psi
- 旋转回路-最大流量
- 21加仑/分钟
- 杆式安装-最大
- 110吨
- 杆式安装-最小
- 90吨
- 臂架安装-最小
- 30吨
- 吊杆安装-最大
- 54吨
- 周期时间-关闭
- 3.4秒
切得越多,切得越快
- 通过设计提高生产效率. 剪切机 are designed as a system solution to cut more tons per day and make you more money by balancing machine capabilities, 剪筒尺寸, 下颚深度和开口, 和矫直机臂长.
- Increase cut efficiency by up to 15 percent and reduce blade wear with the dual offset apex jaw design.
- Accurately place the jaws in optimum cutting position without moving the machine with the standard 360° rotator on the S3000 Series.
- 在整个切割周期中,功率是一致的.
- The shears are optimized for 猫 excavators to ensure proper matching, 最佳循环次数, 以及活动范围.
- Increase cutting efficiency with tapered spacer plates which reduce jamming and drag.
- The cylinder rod is completely protected inside the frame reducing downtime and the risk of damage and allowing for a slimmer design for better visibility.
- The jaw relief area allows material to fall away freely without hindering the next cutting cycle.
持久的品质
- Reduce maintenance costs with the new Bolt-on Piercing Tip. Dowels protect the bolts from stress that leads to loosening and a bushing equalizes force on both halves of the tip to help prevent splitting.
- 在苛刻的液压要求下自信地工作. Major hydraulic components are built with a 4 to 1 safety factor and can withstand pressure spikes up to 20,000-psi (1378 bar).
- Increase overall durability with the solid plate construction of the upper jaw.
- The housing is designed with a 60 percent safety factor in yield strength and high-stress areas are built with extra thick plates.
- The heel plate is constructed of AR400 high-wear resistant material to provide long life between weld build up and replacement.
- Endure high forces with confidence with the oversized torque tube.
易于维护
- 轻松安全地完成维护任务. 剪切机 can be greased at ground level along with the machine stick cylinder pin and boom pin.
- 通过现场可维修的转盘减少停机时间. Removing and resealing can be done quickly and easily while the shear is mounted to the machine, 不需要把它带到商店.
- 服务 and adjust the pivot group without the need for any special tools. The side play can be easily adjusted by simply tightening the pin.
- Easily change the tip and flip the blade in thirty minutes with standard tools.
- Access the cylinder’s hoses and speed valve easily from the side of the shear. This feature eliminates the need for a cover that can fall off and need repaired.
- 你得到了支持. The 猫 Dealer Network is your one point of contact for all your service needs.
满足您需求的选项
- 连接ing your shear to a variety of machines has never been easier. Dual high-pressure ports allow the shear to attach to any compatible machine regardless of the hydraulic layout.
- Meet your specific needs with straight and rotating configurations and boom and stick mount options.
- 直- S2000系列
- 繁荣的安装
- 用于二次拆除和报废应用
- 无需旋转器,降低了维护成本
- Larger shears can be used on smaller machine size classes
- 旋转- S3000系列
- 吊杆式或杆式安装
- 澳门新葡京博彩 in scrap, primary, and secondary demolition applications
- 提供最佳的循环时间和定位
- 吊杆安装-废料应用的理想选择, boom mounted shears allow for easier handling and operation.
- 棒式安装-理想的拆除应用, stick mounted shears are compatible with larger machines and provide a greater reach.
- 直- S2000系列